Shotbolt Lock Units Type F HM G + F ST X

 

Shotbolt lock units F HM G + F ST X (previous designation G SC X) are designed according to the modular system principle and offers high flexibility with regard to the position of the connector. The solenoid body with coil and electrical connectionis plugged into the tube (bearing and housing for the movable armature) and can be rotated by unscrewing the fastening nut, if required. If the nut is screwed off, the solenoid body can be removed and plugged on again, rotated by 180°. In case of failure, the coil may be replaced without further mechanical intervention.

The modular design allows to equip the device also with a solenoid body type which has approvals to ATEX and IECEx for the operation in explosive areas. Please refer to the data sheet of the devices F MM E + F ST X

 

Sizes (Ø): 37 mm, 45 mm, 63 mm
Stroke: 8 mm, 10 mm, 12 mm
Magnetic force: 8.7 N – 33 N
Admissible lateral force in normal position: 600 N – 2000 N

  • Nearly horizontal force vs. stroke characteristic 
  • Pull or push types 
  • Function: single acting solenoid with installed return spring 
  • Electrical connection via plug connector according to DIN EN 175301-803
  • Fastening via central thread 
  • Protection class: IP54
  • Voltage type: direct current, DC
  • Options: further electrical connections, explosion-proof designs to ATEX/IECEx, end position sensing

If you need a similar type to operate a mechanical device we refer to our type F HM G + F MT X