Single Acting Solenoids according to ATEX + IECEx Type F MM E + F MT X
The DC single acting solenoids F MM E + F MT X are designed to the modular system principle and offers high flexibility relating to the position of the connector. The magnetic body with coil and electrical connection is plugged onto the tube (bearing and housing for the movable armature) and can be rotated by unscrewing the fastening nut, if required. If the nut is screwed off, the magnetic body can be removed and plugged in again, rotated by 180°. In case of a failure, a replacement of the coil is possible without further mechanical intervention.
Sizes (Ø): 37 mm, 45 mm, 63 mm
Stroke: 8 mm, 10 mm, 12 mm
Magnetic force: 11 N – 60 N
- Nearly horizontal force vs. stroke characteristic
- Pull or push type, depending on mounting
- Electrical connection via terminal box
- Fastening via central thread
- Protection class: IP20
- Voltage type: direct current, DC
If you intend to perform a locking function with the device, we also refer to our shotbolt lock units type G SC X ... B01
MAGNET-SCHULTZ GmbH & Co. KG
+49 8331 1040
info@magnet-schultz.com